KERDI-DRAIN Shower Checklist - Schluter

Schluter Drain Data Sheet Including Line Drains

Schluter Kerdi Drain Stainless PVC Version

Too low to display
  • Review
  • TAG : Schluter-KERDI-SHOWER-L is a polystyrene sloped tray with pre ..
ADD TO CART
  • Description: Schluter Systems Kerdi Shower Drain Kit ABS, PVC or Stainless Steel Flange, 4 Inch Grate. 4" (100 mm) square, fully adjustable grate. Accommodates 1/4" (6 mm) to 1-1/4" (32 mm) tile thicknesses. ABS, PVC or stainless steel flange, 2" (50mm) drain outlet. Kerdi Kit includes 4 inside corners & 2 Outside corners. MV Seal or Pipe seal not included with this kit.

    Schluter Kerdi Shower Drain is a floor drain specifically designed to allow connections to Schluter Kerdi or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. Schluter Kerdi Shower Drain consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.The standard Schluter Kerdi Shower Drain is attached directly to the waste line. The drain casing is available in ABS, PVC, or stainless steel. The plastic drain casings feature a fleece-covered bonding flange. They are available with standard 2" (50 mm) and 3" (75 mm) outlets and attached to the pipe using an appropriate solvent cement. The stainless steel drain casings are available with standard 2" (50 mm) and 3" (75 mm) no-hub outlets and are attached to the pipe using an appropriate mechanical no-hub coupling. The simple connection to standard drain outlets makes Schluter Kerdi Shower Drain suitable for new construction and renovation.

  • Schluter Kerdi Shower Drain is a floor drain specifically designed to allow connections to Schluter Kerdi or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. Schluter Kerdi Shower Drain consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.

    The standard Schluter Kerdi Shower Drain is attached directly to the waste line. The drain casing is available in ABS, PVC, or stainless steel. The plastic drain casings feature a fleece-covered bonding flange. They are available with standard 2" (50 mm) and 3" (75 mm) outlets and attached to the pipe using an appropriate solvent cement. The stainless steel drain casings are available with standard 2" (50 mm) and 3" (75 mm) no-hub outlets and are attached to the pipe using an appropriate mechanical no-hub coupling. The simple connection to standard drain outlets makes Schluter Kerdi Shower Drain suitable for new construction and renovation.

    12-27-2011, 06:58 PM   #1
    chRichmond
    Registered User
     
    Join Date: Dec 2011
    Posts: 3
    Schluter Kerdi Drain Leak

    I am doing a leak test on a Schluter Kerdi shower drain. I have had water in for 6 hours now and the amount of weeping around the drain is concerning me. It appears that the water has leaked all the way up to the outer ring of the drain flange.


    I have attached a photo showing that the water stains have spread to about 2 1/2 to 3 inches beyond the exposed edge of the Kerdi drain flange. (Note, the 3/4 inch white ring is Kerdi-Fix.)

    Should this amount of seepage be a concern? If so, how can this be repaired?
    Attached Images
      
    __________________
    chRichmond
     

Schluter Kerdi Shower Pan ST-81/152 32x60 Center Drain